Mary Ostler

I  had wanted to finish this tent in time for Tir Righ Investiture at the end of August. I am now confident that I will be able to do a test run at SYGC this weekend. This works out better, as I will have a chance to work out some bugs before investiture. I will be cutting some corners to make the new deadline. The first place to cut corners is the strap hangers. I had intended to do a very thorough job on these, as the Bedouin didn’t have a lot of wooden things for me to make… and I like playing with the wood workings tools. The good stuff will just have to wait.

graphic from "Tents: Architecture of the Nomads"

First thing I did was scavenge through the wood pile for some wood that could handle the job. I have lots of pine, hemlock, fir, and ply, but none of those wood would either be strong enough or look right. Then I found the left over hard wood skid rips I had cut when I was making Mistress Agnes’ x-chair. No idea what species of wood it is, but it cuts easily on the band saw and is insanely strong… Perfect. They were also already cut to 3/4″ thick  1.5″ wide… double perfect. I cut out segments in  5,6 & 10″ lengths to match the rough size of the strapping. After that, all it needed was a quick doodle and some band saw work. I used the first piece as a template for the rest of the hangers.

I saved even more time by ripping the hangers in half, reducing the band saw work in half. I then proceeded to stand on the new thinner piece to see if it would break… nope. Damn this wood is strong.

I did a quick check to see if they looked right with the braided cord.

Looks kind of like a skeleton rib cage.

graphic from "Tents: Architecture of the Nomads"

Moving on the the ridge pole. The one illustrate in the book for the ouled nail tents looks to be no longer than 2ft and has some strange carved, & cut out areas. I like the void in the center part, as it would be a great place to tie a lantern from.

Grabbed a Douglas Fir skid runner and chopped it down to a 2ft length, and quickly doodled out a design on the side. Once all the bugs are worked out on this tent, I will be replacing this post along with the strap hangers.

The doodle side profile cut out on the band saw.

I marked a recess line on the bottom of the ridge pole. I left more wood in the center than is illustrated in the book as I was worried about the mortised triangle that goes through the ridgepole. Its a soft wood, and the chance to breaking the bottom out is great, so a bigger buffer was in order.

I love my chisels. Lee Valley rules… just say’n.

The through mortise was a pain. Had a lot of muckin about to get it to work. The 1″ chisel cut the edges, and the 1/4″ chisel worried out all of the chips.

Lantern rope will be threaded through the hole.

I went to three different shops at lunch today trying to find 3/8″ sisal rope. Its a common item at hardware stores and Canadian Tire but everyone was out of it today. I could have bought the 1/4 sisal, but decided to get the nylon rope instead. The nylon rope can quickly have the cut ends melted to prevent unraveling, but the sisal would all have to be whip lashed. Since the 1/4  rope will be replaced at a later date (such as when I make new hangers) I am going with convenience over periodness (weeping uncontrollably).

I can already tell I made the hangers a little to short. The illustrations all show the  braided cord angled out farther than the strap width… Learning, learning, learning….

Next Post: Poles, and set up.